Adhesive-coated, stratified polyester film intended for windshield protection of racing vehicles. Thermoformable film with 4 removable layers. Durably scratch-resistant layers. Application to the exterior of windshields.
USER’S INSTRUCTIONS: • Recommended minimum application temperature: +18 °C (+64 °F) • Operating temperature range: -40 °C to +90 °C (-40 °F to +194 °F) • For an optimal installation and duration of use of the PRO4SHIELD film, the film application must be carried out by an installer who has followed the Tear-off training provided by HEXIS S.A.S. • Film exclusively reserved for motor racing vehicles on race circuits or roads closed to normal traffic. • Application to the outer side of windshields. • During storage, always handle with clean dry hands. • One-direction thermoformable film. • Always remove the liner just before application, and squeegee the film immediately after as instructed during the HEXIS training courses. • Quasi-immediate adhesion: do not peel off once applied. • Only use the special tools dedicated to the application of vehicle window films. • Wait 30 days after application before cleaning the film.
OPERATING RECOMMENDATIONS: • For further information on the application method of the PRO4SHIELD film, please refer to its Application Guide available under the «Professionals» heading, in the «Solar and safety films” category on our website www.hexisgraphics.com. • The film can be cleaned with soapy water and a non-abrasive sponge. • Dry the film with a rubber squeegee or a clean microfibre cloth.
